Diagnostic-Leaching Response Fingerprints of Heterogeneous Copper Ores: Mineralogical Context, Copper Accessibility, and Unresolved Deportment
DOI:
https://doi.org/10.66104/swmp0r98Keywords:
cobre, lixiviação diagnóstica, mineralogia de processo, sulfato férrico, ácido sulfúrico, geometalurgiaAbstract
Total copper grade does not necessarily rank the hydrometallurgical response of heterogeneous copper ores because the accessible fraction of Cu depends on mineral association, gangue composition, oxidation state, and the chemical and thermal severity of the leaching environment. This study integrates bulk chemistry, an archived reported modal-mineralogy dataset, dry-residue mass balances, and independent-aliquot diagnostic leaching for four coded copper-ore samples (PQH-CU001 to PQH-CU004). The archive contains no documented within-sample process replication; accordingly, the work is a descriptive, archived-data response-fingerprint reanalysis rather than a statistically validated geometallurgical domain or predictive model. Feed Cu ranged from 0.659 to 1.355 wt%, while the reported mineral assemblages contained strongly variable proportions of biotite (28.90–37.78 wt%), Fe oxyhydroxides (9.13–41.08 wt%), quartz (10.10–23.06 wt%), chlorite (3.82–16.65 wt%), and garnet (6.44–13.56 wt%). Explicitly reported Cu oxyhydroxides represented only 0–0.04 wt% and were quantitatively insufficient to account for the measured bulk Cu grades. Residue-inventory-based apparent Cu extraction ranged from 12.77 to 38.69% in nominal 5% acetic acid, 22.89 to 52.86% in nominal 5% sulfuric acid, and 50.05 to 74.24% under a hot ferric-sulfate condition at approximately 90 °C. The observed accessibility ranking was invariant across all three environments: PQH-CU003 > PQH-CU004 > PQH-CU002 > PQH-CU001. The lowest-grade sample, PQH-CU003 (0.659 wt% Cu), showed the highest fractional extraction, whereas the highest-grade sample, PQH-CU002 (1.355 wt% Cu), was substantially less accessible. On an original-ore basis, Cu remaining after the hot-ferric condition ranged from 0.170 to 0.638 wt%, with PQH-CU001 and PQH-CU002 retaining 0.638 and 0.614 wt% Cu, respectively. Fe-oxyhydroxide abundance alone did not reproduce the extraction ranking, and similar dry-residue yields were associated with widely different Cu extractions. The observations identify an unresolved Cu-deportment gap and diagnostic response fingerprints, but they do not resolve Cu host phases. Because the diagnostic conditions were applied to independent aliquots, and because the hot ferric test also differed in temperature and acidity environment, differences among conditions are operational extraction contrasts rather than sequential mineral fractions or a ferric-specific effect.Downloads
References
Apua, M. C., & Madiba, M. S. (2021). Leaching kinetics and predictive models for element extraction from copper oxide ore in sulphuric acid. Journal of the Taiwan Institute of Chemical Engineers, 121, 313–320. https://doi.org/10.1016/j.jtice.2021.04.005
Barton, I. F., & North, R. M. (2024). Geometallurgy of the Tenke-Fungurume sediment-hosted copper-cobalt district, D.R. Congo. Minerals Engineering, 218, 108993. https://doi.org/10.1016/j.mineng.2024.108993
Baum, W. (2014). Ore characterization, process mineralogy and lab automation—A roadmap for future mining. Minerals Engineering, 60, 69–73. https://doi.org/10.1016/j.mineng.2013.11.008
Chetty, D. (2018). Acid-gangue interactions in heap leach operations: A review of the role of mineralogy for predicting ore behavior. Minerals, 8(2), 47. https://doi.org/10.3390/min8020047
De Castro, B., Benzaazoua, M., Chopard, A., & Plante, B. (2022). Automated mineralogical characterization using optical microscopy: Review and recommendations. Minerals Engineering, 189, 107896. https://doi.org/10.1016/j.mineng.2022.107896
Fandrich, R., Gu, Y., Burrows, D., & Moeller, K. (2007). Modern SEM-based mineral liberation analysis. International Journal of Mineral Processing, 84(1–4), 310–320. https://doi.org/10.1016/j.minpro.2006.07.018
Fang, C., Cai, T., Yu, S., Gao, L., Huang, L., Peng, H., Qiu, G., & Wang, J. (2022). How ferric salt enhances the first-stage acidic leaching of chalcocite: Performance of intermediate crystallite. JOM, 74(5), 1969–1977. https://doi.org/10.1007/s11837-022-05171-w
Fang, C.-J., Wang, J., & Qiu, G.-Z. (2024). Advancements on chemical-biological dissolution mechanism and leaching kinetics of chalcocite. Transactions of Nonferrous Metals Society of China, 34(1), 283–297. https://doi.org/10.1016/S1003-6326(23)66398-8
Garner, C., Strongman, J., Staniforth, B., Fletcher, J., & Brough, C. (2024). The importance of sample preparation techniques for use in mine site operational mineralogy. Minerals Engineering, 205, 108463. https://doi.org/10.1016/j.mineng.2023.108463
Gottlieb, P., Wilkie, G., Sutherland, D., Ho-Tun, E., Suthers, S., Perera, K., Jenkins, B., Spencer, S., Butcher, A., & Rayner, J. (2000). Using quantitative electron microscopy for process mineralogy applications. JOM, 52(4), 24–25. https://doi.org/10.1007/s11837-000-0126-9
Henne, A., Craw, D., Paterson, D., & Southam, G. (2021). Textures and mineralogy of residual supergene copper silicates in oxidized overburden. Minerals Engineering, 163, 106775. https://doi.org/10.1016/j.mineng.2021.106775
Kang, C.-U., Ji, S.-E., Pabst, T., Choi, K.-W., Khan, M. A., Kumar, R., Krishnaiah, P., Han, Y., Jeon, B.-H., & Kim, D.-H. (2021). Copper extraction from oxide ore of Almalyk Mine by H₂SO₄ in simulated heap leaching: Effect of particle size and acid concentration. Minerals, 11(9), 1020. https://doi.org/10.3390/min11091020
Koh, E. J. Y., Amini, E., Spier, C. A., McLachlan, G. J., Xie, W., & Beaton, N. (2024). A mineralogy characterization technique for copper ore in flotation pulp using deep learning machine vision with optical microscopy. Minerals Engineering, 205, 108481. https://doi.org/10.1016/j.mineng.2023.108481
Li, Y., Fu, Y., Kou, J., Liu, Y., Yin, J., Wang, P., & Sun, C. (2025). Acid and impurities-reducing leaching of Muliashi refractory copper oxide ore by stepwise acid addition-starvation leaching: Behavior, mechanism and industrial application. Separation and Purification Technology, 379, 135026. https://doi.org/10.1016/j.seppur.2025.135026
Liang, Z., Wang, Q., Tang, L., Duan, H., Chen, L., Xue, Z., & Li, Y. (2024). Recovery of Cu from copper oxide ore using magnetic separation-leaching process and magnetism study of copper-containing minerals. Minerals Engineering, 218, 109006. https://doi.org/10.1016/j.mineng.2024.109006
Lotter, N. O., Baum, W., Reeves, S., Arrué, C., & Bradshaw, D. J. (2018). The business value of best practice process mineralogy. Minerals Engineering, 116, 226–238. https://doi.org/10.1016/j.mineng.2017.05.008
Nyembwe, K. J., Fosso-Kankeu, E., Waanders, F., Mamba, B. B., & Mkandawire, M. (2024). Chalcopyrite leaching in ferric sulfate: The effect of Fe₃O₄-CuFeS₂ galvanic couple on the Cu dissolution. Minerals, 14(2), 162. https://doi.org/10.3390/min14020162
Owen, N. D., Ram, R., Vollert, L., Seaman, B., Etschmann, B., Xing, Y., Rosemann, M., Verdugo, L., O’Callaghan, J., & Brugger, J. (2024). The deleterious role of gangue mineralogy in copper extraction: A case study of poor recovery in leaching low-grade Cu ores. Applied Geochemistry, 166, 105984. https://doi.org/10.1016/j.apgeochem.2024.105984
Pan, Z., Jian, C., Peng, Z., Fu, X., He, R., Yue, T., & Sun, W. (2024). Study on process mineralogy of the combined copper oxide ore in Tibet and acid leaching behavior with calcium fluoride. Minerals, 14(4), 352. https://doi.org/10.3390/min14040352
Pereira, A. C., Heck, N. B., & Gomes, M. R. dos S. (2016). Aplicação de diagnóstico de lixiviação como suporte à pesquisa mineral de minério de transição de cobre [Diagnostic leaching application in support of mineral research on transition copper ore]. Tecnologia em Metalurgia, Materiais e Mineração, 13(3), 242–247. https://doi.org/10.4322/2176-1523.0985
Petersen, J. (2016). Heap leaching as a key technology for the recovery of value from low-grade ores: A brief overview. Hydrometallurgy, 165, 206–212. https://doi.org/10.1016/j.hydromet.2015.09.001
Thomas, M. J. (2021). Understanding gangue acid consumption in copper sulfide heap leaching: Predicting the impact of carbonates, silicates and secondary precipitates. Minerals Engineering, 171, 107090. https://doi.org/10.1016/j.mineng.2021.107090
Tiu, G., Ghorbani, Y., Jansson, N., Wanhainen, C., & Bolin, N.-J. (2023). Quantifying the variability of a complex ore using geometallurgical domains. Minerals Engineering, 203, 108323. https://doi.org/10.1016/j.mineng.2023.108323
Valenzuela-Elgueta, J., Delgado, A. V., & Ahualli, S. (2025). Fundamentals of copper(II) adsorption on phyllosilicate minerals relevant to crud formation in solvent extraction from heap leach liquors. Hydrometallurgy, 231, 106409. https://doi.org/10.1016/j.hydromet.2024.106409
Published
Issue
Section
License
Copyright (c) 2026 Antonio Clareti Pereira (Author)

This work is licensed under a Creative Commons Attribution 4.0 International License.
