Rotary-Furnace Recycling of Aluminum Scrap and Dross: A Critical Review of Feedstock–Flux–Furnace Interactions, Metal Recovery, Emissions, and Circularity
DOI:
https://doi.org/10.66104/vnhbpj53Keywords:
Reciclagem de alumínio, Forno rotativo, Fluxo salino, Recuperação de metal, Escória salina de alumínio, Alumínio secundárioAbstract
Rotary furnaces remain important in secondary aluminum production because they can process oxidized, coated, low-density, contaminated, and dross-rich feeds that are difficult to recover in conventional bath furnaces. Their flexibility creates a recovery–residue trade-off: heat, rotation, and chloride–fluoride fluxes can liberate and coalesce metal droplets, but may also increase oxidation, emissions, refractory attack, and salt-slag generation. This structured critical narrative review evaluates a coded corpus of 106 publications from 2020 to August 2026. Retrospective A–E classification was performed by one reviewer and represents interpretive judgments of industrial transferability. No level-A repeated industrial campaign with closed aluminum–salt–energy–quality balances was identified. Accordingly, the proposed nine-gate Feedstock–Flux–Furnace–Residue framework is a testable decision architecture rather than a validated control model; low-salt and salt-free strategies remain feed-specific and require prospective industrial validation.Downloads
References
Aly, L. (2026). Engineering innovations in aluminum dross recovery: Transforming waste to resources. In R. K. Hamdan (Ed.), Integrating big data and IoT for enhanced decision-making systems in business: Volume 1 (pp. 11–21). Springer. https://doi.org/10.1007/978-3-031-97609-4_2
Anderson, A., Kumar, V., Rao, V. M., & Grogan, J. (2022). A review of computational capabilities and requirements in high-resolution simulation of nonferrous pyrometallurgical furnaces. JOM, 74(4), 1543–1567. https://doi.org/10.1007/s11837-022-05169-4
ASM International. (1993). Molten aluminum processing and casting. In J. R. Davis (Ed.), Aluminum and aluminum alloys (pp. 199–230). ASM International. https://doi.org/10.31399/asm.ash.aaa.t66100199
Bao, S., Eggen, S., Syvertsen, M., & Kvithyld, A. (2023). Collection, thermal treatment, and remelting end-of-life Al packaging in Norway. JOM, 75(12), 5755–5763. https://doi.org/10.1007/s11837-023-06195-6
Bao, S., Kvithyld, A., Bjørlykke, G. A., & Sandaunet, K. (2023). Recycling of aluminum from aluminum food tubes. In S. Broek (Ed.), Light Metals 2023 (pp. 960–966). Springer. https://doi.org/10.1007/978-3-031-22532-1_128
Bartie, N. J., Abadías Llamas, A., Meskers, C., & Reuter, M. A. (2024). Process simulation—Thermodynamics and process technology to understand recycling systems. In C. Meskers, E. Worrell, & M. A. Reuter (Eds.), Handbook of recycling: State-of-the-art for practitioners, analysts, and scientists (2nd ed., pp. 685–700). Elsevier. https://doi.org/10.1016/B978-0-323-85514-3.00011-7
Bazhin, V. Yu., Fernandez, P. Al., & Slobodin, V. A. (2025). Application of motor scrap in the production of aluminum-alloy ingots with thixotropic structure (under the conditions of the Republic of Cuba). Metallurgist, 69(6), 905–913. https://doi.org/10.1007/s11015-025-02011-5
Becker, J., & Friedrich, B. (2021). Proof-of-principle of recycling of off-spec Scalmalloy® in molten salt. World of Metallurgy—ERZMETALL, 74(4), 222–227. Article/issue record
Bhaskar, M., Anand, G., Nallusamy, T., Koilraj, M., & Suresh, P. (2022). Recycling of aluminum chips in die casting foundry. International Journal of Metalcasting, 16(3), 1575–1583. https://doi.org/10.1007/s40962-021-00707-3
Cai, Y., Song, D., Yang, D., Zhao, Y., Ke, B., Zhang, D., & Zhang, W. (2024). Effect of Na₃AlF₆ contents in refining flux on 3D characteristics of pore and mechanical properties of recycled Al–Mg–Si alloy. Materials Today Communications, 39, Article 108797. https://doi.org/10.1016/j.mtcomm.2024.108797
Çapkın, İ. Y., & Gökelma, M. (2023). An investigation on inclusions forming during remelting of aluminum and magnesium scraps under a salt flux. JOM, 75(10), 4269–4274. https://doi.org/10.1007/s11837-023-06070-4
Chen, X., Ben Saada, M., Lavisse, B., & Ammar, A. (2025). Recent advances in the remelting process for recycling aluminium alloy chips: A critical review. International Journal of Material Forming, 18, Article 42. https://doi.org/10.1007/s12289-025-01904-9
Crego, O., Ferrín, J. L., Gómez, D., Pérez-Pérez, L. J., & Salgado, P. (2024). Transient mathematical modelling of a gas rotary furnace for melting slag. Applied Thermal Engineering, 246, Article 122928. https://doi.org/10.1016/j.applthermaleng.2024.122928
Dahiya, A. (2022). Thermal plasmas for industrial high-temperature processes: Modelling studies of aluminium smelting and steam cracking [Master’s thesis, Chalmers University of Technology]. Chalmers ODR. Chalmers institutional repository record
Deng, L., Johnson, S., & Gencer, E. (2022). Environmental-techno-economic analysis of decarbonization strategies for the Indian aluminum industry. Energy Conversion and Management, 274, Article 116455. https://doi.org/10.1016/j.enconman.2022.116455
Diop, M. A., Shi, Z., Fafard, M., Bousso, S. A., Tao, W., & Wang, Z. (2021). Green power furnaces in aluminum cast house for scrap preheating using CO₂-flue gas. Journal of Sustainable Metallurgy, 7(1), 46–59. https://doi.org/10.1007/s40831-020-00323-1
Doutre, D., & Kvithyld, A. (2024). Aluminum. In C. Meskers, E. Worrell, & M. A. Reuter (Eds.), Handbook of recycling: State-of-the-art for practitioners, analysts, and scientists (2nd ed., pp. 319–337). Elsevier. https://doi.org/10.1016/B978-0-323-85514-3.00003-8
Dzurňák, R., Varga, A., Jablonský, G., Variny, M., Atyafi, R., Lukáč, L., Pástor, M., & Kizek, J. (2020). Influence of air infiltration on combustion process changes in a rotary tilting furnace. Processes, 8(10), Article 1292. https://doi.org/10.3390/pr8101292
Dzurňák, R., Varga, A., Jablonský, G., Variny, M., Pástor, M., & Lukáč, L. (2021). Analyzing the formation of gaseous emissions during aluminum melting process with utilization of oxygen-enhanced combustion. Metals, 11(2), Article 242. https://doi.org/10.3390/met11020242
Flores Saldívar, A. A., Juárez Martínez, R., Flores Valdés, A., Torres, J. T., Ochoa Palacios, R. M., & Li, Y. (2021). Mathematical modelling for furnace design refining molten aluminum. Metals, 11(11), Article 1798. https://doi.org/10.3390/met11111798
Gallo, R., & Neff, D. (2008). Aluminum fluxes and fluxing practice. In S. Viswanathan, D. Apelian, R. J. Donahue, B. DasGupta, M. Gywn, J. L. Jorstad, R. W. Monroe, M. Sahoo, T. E. Prucha, & D. Twarog (Eds.), ASM handbook: Volume 15, Casting (pp. 230–239). ASM International. https://doi.org/10.31399/asm.hb.v15.a0005300
Gao, Q., Guo, Q., Li, Y., Ren, B., Fu, M., Li, H., Tian, D., & Ding, M. (2021). Innovative technology for defluorination of secondary aluminum dross by alkali leaching. Minerals Engineering, 172, Article 107134. https://doi.org/10.1016/j.mineng.2021.107134
Gökelma, M., Hatipoğlu, U., Vallejo-Olivares, A., Önen Tüzgel, R., Kıvrak, O., Bazoğlu, E., Çizen, Z. S., & Tranell, G. (2024). Effects of size and mechanical pre-treatment on aluminium recovery from municipal solid waste incineration bottom ash. Minerals, 14(10), Article 1006. https://doi.org/10.3390/min14101006
Gökelma, M., Storm Aarnæs, T., Maier, J., Renkel, M. F., Ekstrøm, K. E., Friedrich, B., & Tranell, G. (2021). Behavior of Al₄C₃ particles during flotation and sedimentation in aluminum melts. Metallurgical and Materials Transactions B, 52(2), 743–754. https://doi.org/10.1007/s11663-020-02049-7
Gyarmati, G., Pálóczi, Á., Somfai, D., Ferenczi, T., Mende, T., & Kéri, Z. (2025). Analysis of different commercial solid fluxes used during the rotary degassing melt treatment of casting aluminum alloys. Metallurgical and Materials Transactions B, 56(1), 782–797. https://doi.org/10.1007/s11663-024-03376-9
Hannula, J., Godinho, J. R. A., Abadías Llamas, A., Luukkanen, S., & Reuter, M. A. (2020). Simulation-based exergy and LCA analysis of aluminum recycling: Linking predictive physical separation and re-melting process models with specific alloy production. Journal of Sustainable Metallurgy, 6(1), 174–189. https://doi.org/10.1007/s40831-020-00267-6
Harmaji, A., Jafari, R., & Simard, G. (2024). Valorization of residue from aluminum industries: A review. Materials, 17(21), Article 5152. https://doi.org/10.3390/ma17215152
Hegedüs, B., Nagy, G., & Kékesi, T. (2023). Salt recovery from the hot treated aluminium melting dross residue. Hungarian Materials and Chemical Sciences and Engineering, 47(1), 128–137. https://doi.org/10.32974/mse.2022.013
Huang, C., Liu, Z., & Li, J. (2023). Evolution behavior of the surface oxide film of Al alloy scraps in the melt. Metals, 13(3), Article 510. https://doi.org/10.3390/met13030510
Illés, I. B., & Kékesi, T. (2023). Enhancing the metal yield of the rotary converter melting of aluminium drosses with simple sodium-chloride: Thermodynamic and kinetic consideration. Hungarian Materials and Chemical Sciences and Engineering, 47(1), 72–78. https://doi.org/10.32974/mse.2022.007
Ji, F., Li, Z., Xiong, M., Zhang, H., Yu, Z., Gu, Y., Wang, Y., & Li, F. (2025). Market value and carbon reduction potential of secondary aluminum ash resource utilization: A strategic analysis. Chemical Engineering Journal, 507, Article 160446. https://doi.org/10.1016/j.cej.2025.160446
Kheirkhah, P., Sa, V., & Makwana, A. (2025). Oxy-fuel combustion: Impact of hydrogen combustion on aluminum melt quality in secondary melting processes. In L. Edwards (Ed.), Light Metals 2025 (pp. 1234–1242). Springer. https://doi.org/10.1007/978-3-031-80676-6_153
Krasnyi, B. L., Krasnyi, A. B., & Serebryanskii, D. A. (2024). Practical aspects of gas cleaning with the use of ceramic filters. Steel in Translation, 54(10), 1021–1032. https://doi.org/10.3103/S0967091224701882
Kudyba, A., Akhtar, S., Johansen, I., & Safarian, J. (2021a). Aluminum recovery from white aluminum dross by a mechanically activated phase separation and remelting process. JOM, 73(9), 2625–2634. https://doi.org/10.1007/s11837-021-04730-x
Kudyba, A., Akhtar, S., Johansen, I., & Safarian, J. (2021b). Valorization of aluminum dross with copper via high-temperature melting to produce Al-Cu alloys. Materials, 14(15), Article 4117. https://doi.org/10.3390/ma14154117
Kulikov, B., Dombrovskiy, N., Kosovich, A., Partyko, E., Mansurov, Y., Yuryev, P., Stepanenko, N., Baykovskiy, Y., Durnopyanov, A., Balanev, R., & Baranov, M. (2026). Multistage recycling of aluminum casting slags: Metal extraction and salt flux regeneration. Recycling, 11(3), Article 52. https://doi.org/10.3390/recycling11030052
Kulikov, B., Partyko, E., Kosovich, A., Yuryev, P., Mansurov, Y., Stepanenko, N., Baykovskiy, Y., Bozhko, D., Durnopyanov, A., Dombrovskiy, N., & Baranov, M. (2025). Analysis of composition, properties, and usage efficiency of different commercial salt fluxes for aluminum alloy refining. Metals, 15(4), Article 448. https://doi.org/10.3390/met15040448
Lan, X., Gao, J., Feng, G., Li, X., & Guo, Z. (2026). Innovative integration of superimposed extrusion with supergravity for enhanced metallic aluminum recovery from hot dross. Journal of Materials Research and Technology, 41, 2070–2080. https://doi.org/10.1016/j.jmrt.2026.01.141
Lawrence, M., Hendershot, R. J., Guha, A., & Dines, M. (2020). Digital twin methodology improves performance and yield in an aluminum tilt rotary furnace. Light Metal Age, 78(5), 54–56.
Li, C., Gökelma, M., Dang, T. N., Huang, J., Huang, C., Li, J., & Friedrich, B. (2023). Assessment of melt cleanliness of secondary 5000 aluminum alloy via non-metallic inclusions characterization. Metallurgical and Materials Transactions B, 54(2), 578–592. https://doi.org/10.1007/s11663-022-02710-3
Li, R., Zhong, J., Xie, M., Huang, Z., Zhao, H., & Liu, F. (2024). Quantitative evaluation on AlN transformation and volatilization of chlorides and fluorides in pyrometallurgical treatment for aluminum dross. Journal of Materials Research and Technology, 29, 2879–2888. https://doi.org/10.1016/j.jmrt.2024.02.053
Li, T., Guo, Z., Qin, H., & Xie, H. (2026). Efficient removal of AlN from secondary aluminum dross using binary fluoride: A theoretical and experimental study. Scientific Reports, 16, Article 12986. https://doi.org/10.1038/s41598-026-43443-6
Li, Y., Chen, X., & Liu, B. (2021). Experimental study on denitrification of black aluminum dross. JOM, 73(9), 2635–2642. https://doi.org/10.1007/s11771-021-04771-2
Liao, J., Sharma, A., & Cooper, D. R. (2022). The effect of composition, geometry, and a novel tool design on metal recovery during aluminum process scrap remelting. In Proceedings of the ASME 2022 17th International Manufacturing Science and Engineering Conference (MSEC2022) (Paper No. MSEC2022-84900). American Society of Mechanical Engineers. https://doi.org/10.1115/MSEC2022-84900
Liu, J., Zhang, S., Lou, B., & Shen, H. (2025). Formation of aluminum nitride in dross by contact-diffusion reaction during aluminum recycling. Journal of Alloys and Compounds, 1010, Article 177432. https://doi.org/10.1016/j.jallcom.2024.177432
Lv, S.-S., Zhang, Y., Ni, H.-J., Wang, X.-X., Wu, W.-Y., & Lu, C.-Y. (2022). Effects of additive and roasting processes on nitrogen removal from aluminum dross. Coatings, 12(6), Article 730. https://doi.org/10.3390/coatings12060730
Mahinroosta, M., & Allahverdi, A. (2018). Hazardous aluminum dross characterization and recycling strategies: A critical review. Journal of Environmental Management, 223, 452–468. https://doi.org/10.1016/j.jenvman.2018.06.068
Makwana, A., Merino Allue, D., Sa, V., Basilio, E. E., Hendershot, R., & Seo, E. (2026). Industry 4.0: Implementation of smart combustion technology and process advisor in secondary melting furnaces. In R. Seno (Ed.), Light Metals 2026 (pp. 1293–1301). Springer. https://doi.org/10.1007/978-3-032-13832-3_170
Makwana, A., Sa, V., Kabarowski, J., Huang, Y., Pereira Da Silva Junior, R., & He, X. (2024). Pathways to reduce operational carbon footprint in secondary aluminum melting. In C. Iloeje, S. Alam, D. P. Guillen, F. Tesfaye, L. Zhang, S. A. C. Hockaday, N. R. Neelameggham, H. Peng, N. Haque, O. Yücel, & A. A. Baba (Eds.), Energy Technology 2024: Carbon dioxide management and other technologies (pp. 17–27). Springer. https://doi.org/10.1007/978-3-031-50244-6_2
Mayr, M., & Chasparis, G. C. (2026). Causally-guided pairwise transformer—Towards foundational digital twins in process industry. Procedia Computer Science, 277, 175–184. https://doi.org/10.1016/j.procs.2026.02.059
Milani, V., & Timelli, G. (2023). Solid salt fluxes for molten aluminum processing—A review. Metals, 13(5), Article 832. https://doi.org/10.3390/met13050832
Milani, V., Vallejo-Olivares, A., Tranell, G., & Timelli, G. (2023). Influence of cryolite content on the thermal properties and coalescence efficiency of NaCl–KCl salt flux. In S. Broek (Ed.), Light Metals 2023 (pp. 928–935). Springer. https://doi.org/10.1007/978-3-031-22532-1_123
Modalavalasa, K., & Ayyagari, K. P. R. (2024). Aluminum dross: Aluminum metal recovery and emerging applications. Journal of Material Cycles and Waste Management, 26(4), 1874–1894. https://doi.org/10.1007/s10163-024-01948-0
Moodispaw, M. P., Cinkilic, E., & Luo, A. A. (2024). Thermodynamic modeling of solid flux interactions with molten aluminum. International Journal of Metalcasting, 18, 2846–2852. https://doi.org/10.1007/s40962-023-01256-7
Muñoz-Vélez, M. F., Salazar-Serna, K., Escobar-Torres, D., Rojas-Manzano, M. A., Gómez-Gómez, A., & Maury-Ramírez, A. (2023). Circular economy: Adding value to the post-industrial waste through the transformation of aluminum dross for cement matrix applications. Sustainability, 15(18), Article 13952. https://doi.org/10.3390/su151813952
Ni, H., Lu, C., Zhang, Y., Wang, X., Zhu, Y., Lv, S., & Zhang, J. (2022). Effects of sodium carbonate and calcium oxide on roasting denitrification of recycled aluminum dross with high nitrogen content. Coatings, 12(7), Article 922. https://doi.org/10.3390/coatings12070922
Oyelami, A. T., Adejuyigbe, S. B., & Olusunle, S. O. (2021). Thermal analysis of recuperator developed for waste heat recycling in liquid-fuel fired furnaces. International Journal of Heat and Technology, 39(1), 121–127. https://doi.org/10.18280/ijht.390112
Padamata, S. K., Yasinskiy, A., & Polyakov, P. (2021). A review of secondary aluminum production and its byproducts. JOM, 73(9), 2603–2614. https://doi.org/10.1007/s11837-021-04802-y
Padilla, I., Romero, M., López-Andrés, S., & López-Delgado, A. (2022). Sustainable management of salt slag. Sustainability, 14(9), Article 4887. https://doi.org/10.3390/su14094887
Palimąka, P. (2020). Thermal cleaning and melting of fine aluminium alloy chips. Archives of Foundry Engineering, 20(4), 91–96. https://doi.org/10.24425/afe.2020.133353
Pereira, A. C. (2025a). Aluminum scrap recycling for foundry alloys: Review of technological advances and circular economy challenges. Revista DCS, 22(84), Article e3867. https://doi.org/10.54899/dcs.v22i84.3867
Pereira, A. C. (2025b). From can to sheet: A critical review of aluminum can recycling processes, technologies, and sustainability dimensions (2020–2025). Revista FT, 29(151), 19–20. https://doi.org/10.69849/revistaft/pa10202510261019
Peterson, R. D. (2020). A rapid method of determining salt flux melting point and composition. In A. Tomsett (Ed.), Light Metals 2020 (pp. 1119–1127). Springer. https://doi.org/10.1007/978-3-030-36408-3_151
Philipson, H. (2020). The effect of thickness and compaction on the recovery of aluminium in recycling of foils in salt flux [Master’s thesis, KTH Royal Institute of Technology]. KTH/DiVA. Institutional record/full text
Polat, B. T., Öner, İ. E., Kan, S., Benzeşik, K., & Yücel, O. (2022). Fused calcium aluminate production from aluminum white dross residue. Journal of Sustainable Metallurgy, 8(2), 851–862. https://doi.org/10.1007/s40831-022-00532-w
Rimár, M., Kizek, J., & Kulikov, A. (2020). Numerical modeling of gaseous fuel combustion process with the stepwise redistribution of enriched combustion air. MATEC Web of Conferences, 328, Article 02001. https://doi.org/10.1051/matecconf/202032802001
Rostamian, A., & Bertherat, M. (2025). Optimizing solid and liquid loading times in aluminium melting furnaces: Enhancing efficiency and process control with SmartMelt technology. In L. Edwards (Ed.), Light Metals 2025 (pp. 1100–1107). Springer. https://doi.org/10.1007/978-3-031-80676-6_137
Sahoo, S. K., Chowta, P., Deb, S., & Panigrahi, S. K. (2025). Environmentally friendly, salt-free recycling of aluminum chips via a liquid-state processing route for improved sustainability. Journal of Environmental Management, 394, Article 127578. https://doi.org/10.1016/j.jenvman.2025.127578
Samara, F., Attia, N., Khamis, M., Ali, M. H., & Alam, I. (2020). Is acid treatment of secondary aluminum waste products prior to storage and disposal a viable option? Environmental Nanotechnology, Monitoring & Management, 14, Article 100322. https://doi.org/10.1016/j.enmm.2020.100322
Santos, M. S., Machado, L. S., Miranda, A. C., Almeida Junior, A. R., Damma, D. D., & Lora, F. A. (2025). Aluminum dross recycling by melting: Effect of particle size and flux salt quantity on recorvered aluminum yield. Journal of Bioengineering, Technologies and Health, 8(2), 139–144. https://doi.org/10.34178/jbth.v8i2.478
Schlesinger, M. E. (2013). Aluminum recycling (2nd ed.). CRC Press. https://doi.org/10.1201/b16192
Shi, M., & Li, Y. (2023). Performance improvement in aluminum alloy treated by salt flux with different fluorides. Journal of Materials Engineering and Performance, 32(7), 3065–3072. https://doi.org/10.1007/s11665-022-07306-1
Sinha, M. K., Mishra, B., Das, S. K., & Grosko, T. (2025). Influence of Si, Mn, and Cr on the iron removal from aluminum scrap: A thermodynamic and experimental analysis. JOM, 77(11), 8331–8344. https://doi.org/10.1007/s11837-025-07640-4
Sitaramu, P., Al Qari, Z., & Al-Qahtani, M. (2023). Initiatives to minimize dross generation in casthouse. In TRAVAUX 52: Proceedings of the 41st International ICSOBA Conference (pp. 1845–1852). International Committee for Study of Bauxite, Alumina & Aluminium. Official ICSOBA paper
Solem, C. K. W., Deledda, S., Tranell, G., & Aune, R. E. (2023). Sampling procedure, characterization, and quantitative analyses of industrial aluminum white dross. Journal of Sustainable Metallurgy, 9(1), 95–106. https://doi.org/10.1007/s40831-022-00624-7
Srinath, P., Karuppuswamy, P., Bhagyanathan, C., Gottmyers Melwyn, J., Sathiyaseelan, G., & Ponezhilan, R. (2025). Sustainable removal of impurities from recycled Al–Si alloys using eggshell-derived CaO composite flux. Russian Journal of Non-Ferrous Metals, 66(6), 476–487. https://doi.org/10.1134/S1067821225601078
Sun, B., Guo, L., Wang, Z., Lan, X., & Guo, Z. (2024). Sustainable recycling of pure aluminum from waste chips under supergravity-enhanced separation: A cleaning process. Sustainable Materials and Technologies, 42, Article e01148. https://doi.org/10.1016/j.susmat.2024.e01148
Sun, B., Guo, L., Wang, Z., Lan, X., & Guo, Z. (2025). Direct collection and reuse of dispersed aluminum chips through salt flux and supergravity enrichment: Less salt consumption and circular economy. Journal of Cleaner Production, 521, Article 146230. https://doi.org/10.1016/j.jclepro.2025.146230
Teixeira, A. B., Ambrós, W. M., Sampaio, C. H., Raposo, F. L. Q., De Brum, I. A. S., & Moncunill, J. O. (2022). Optimization of water leaching of chlorides from aluminum salt slag. Minerals, 12(9), Article 1141. https://doi.org/10.3390/min12091141
Tichy, S. (2025, March 24). Decarbonizing aluminum recycling: Evaluating hydrogen in a lab-scale tilting rotary furnace [Poster presentation]. TMS 2025: 154th Annual Meeting & Exhibition, Las Vegas, NV, United States. Montanuniversität Leoben Research Portal.
Tsakiridis, P. E. (2012). Aluminium salt slag characterization and utilization—A review. Journal of Hazardous Materials, 217–218, 1–10. https://doi.org/10.1016/j.jhazmat.2012.03.052
Vallejo-Olivares, A., Pastor-Vallés, E., Pettersen, J. B., & Tranell, G. (2024). LCA of recycling aluminium incineration bottom ash, dross and shavings in a rotary furnace and environmental benefits of salt-slag valorisation. Waste Management, 182, 11–20. https://doi.org/10.1016/j.wasman.2024.04.023
Vallejo-Olivares, A., Gertjegerdes, T., Høgåsen, S., Friedrich, B., & Tranell, G. (2024). Effects of compaction and thermal pre-treatments on generation of dross and off-gases in aluminium recycling. Journal of Sustainable Metallurgy, 10(1), 69–82. https://doi.org/10.1007/s40831-023-00773-3
Vallejo-Olivares, A., Høgåsen, S., Kvithyld, A., & Tranell, G. (2022). Thermal de-coating pre-treatment for loose or compacted aluminum scrap and consequences for salt-flux recycling. Journal of Sustainable Metallurgy, 8(4), 1485–1497. https://doi.org/10.1007/s40831-022-00612-x
Wan, B., Li, W., Liu, F., Lu, T., Jin, S., Wang, K., Yi, A., Tian, J., & Chen, W. (2020). Determination of fluoride component in the multifunctional refining flux used for recycling aluminum scrap. Journal of Materials Research and Technology, 9(3), 3447–3459. https://doi.org/10.1016/j.jmrt.2020.01.082
Wan, B., Li, W., Sun, W., Liu, F., Chen, B., Xu, S., Chen, W., & Yi, A. (2020). Synthesis of cryolite (Na₃AlF₆) from secondary aluminum dross generated in the aluminum recycling process. Materials, 13(17), Article 3871. https://doi.org/10.3390/ma13173871
Wang, J., Cui, H., Guo, Y., Wang, Z., Sun, Z., Liang, J., Lv, L., & Gao, W. (2025). Understanding environmental-economic and risk feasibilities toward aluminum ash treatment processes: A multiobjective assessment. ACS Sustainable Chemistry & Engineering, 13(47), 20349–20362. https://doi.org/10.1021/acssuschemeng.5c03283
Wang, J.-H., Zhong, Y.-Q., Tong, Y., Xu, X.-L., & Lin, G.-Y. (2021). Removal of AlN from secondary aluminum dross by pyrometallurgical treatment. Journal of Central South University, 28(2), 386–397. https://doi.org/10.1007/s11771-021-4610-4
Wang, J.-F., Qiu, Y.-H., Chen, C.-Y., Wang, L.-Z., & Li, J.-Q. (2026). Investigating inclusions and mechanical properties of 1060 aluminum by salt fluxes refining. China Foundry, 23(2), 263–273. https://doi.org/10.1007/s41230-025-4253-4
Wang, M., Zhang, S., Du, S., Wang, J., & Liu, B. (2025). A review of the upcycling of aluminum scrap and dross using molten salt electrolysis. Resources, Conservation and Recycling, 220, Article 108352. https://doi.org/10.1016/j.resconrec.2025.108352
Wang, R., Gao, F., Chen, D., Yin, Z., Li, M., Mao, K., & Li, C. (2026). Innovation in aluminum dross processing: Comprehensive strategies for safe disposal and efficient utilization in China. Materials, 19(15), Article 3179. https://doi.org/10.3390/ma19153179
Wang, Z., Gao, J., Lan, X., & Guo, Z. (2023). Sustainable recovery of metallic Al and reuse of molten salt in Al dross: Salt flux erosion and super-gravity separation. Journal of Cleaner Production, 431, Article 139809. https://doi.org/10.1016/j.jclepro.2023.139809
Wang, Z., Gao, J., Lan, X., & Guo, Z. (2024). Joint utilization and harmless elimination of aluminum dross and refined magnesium slag to simultaneously recover metallic aluminum and fusing agent. Journal of Environmental Management, 366, Article 121680. https://doi.org/10.1016/j.jenvman.2024.121680
Wang, Z., Gao, J., Lan, X., Feng, G., & Guo, Z. (2023). An environmental-friendly method for recovery of aluminum droplets from aluminum dross: Mechanical activation and super-gravity separation. Process Safety and Environmental Protection, 175, 199–211. https://doi.org/10.1016/j.psep.2023.05.045
Wei, J., Liu, Z., Yan, H., & Yang, W. (2023). Study on separation of N, F and Al from hazardous aluminum dross by alkaline roasting. Journal of Material Cycles and Waste Management, 25(4), 2485–2497. https://doi.org/10.1007/s10163-023-01711-x
Wu, Q., Wu, L., Li, H., & Dong, Y. (2025). Disposal of reactive compounds and salts in secondary aluminum dross: A critical review. Process Safety and Environmental Protection, 198, Article 107158. https://doi.org/10.1016/j.psep.2025.107158
Xiao, L., Wang, Y., Zheng, R., Liu, J., Zhao, J., Maraseni, T., & Qian, G. (2023). Identification of recycling pathways for secondary aluminum dross with integrated hybrid life cycle assessment. Resources, Conservation and Recycling, 193, Article 106987. https://doi.org/10.1016/j.resconrec.2023.106987
Xie, H., Guo, Z., Xu, R., & Zhang, Y. (2023). Particle sorting to improve the removal of fluoride and aluminum nitride from secondary aluminum dross by roasting. Environmental Science and Pollution Research, 30(19), 54536–54546. https://doi.org/10.1007/s11356-023-26201-3
Xie, H., Guo, Z., Xu, R., Zhang, Y., & Xu, Z. (2023). Synergistic effect of inorganic salt and AlN removal in the secondary aluminum dross during the roasting process. Journal of Alloys and Compounds, 966, Article 171518. https://doi.org/10.1016/j.jallcom.2023.171518
Yamamoto, T., Kato, K., Komarov, S. V., Taniguchi, R., & Ishiwata, Y. (2020). Evaluation of aluminum dross generation rate during mechanical stirring of aluminum through model experiment and numerical simulation. Metallurgical and Materials Transactions B, 51(4), 1836–1846. https://doi.org/10.1007/s11663-020-01842-8
Yang, B., Friedrich, S., & Friedrich, B. (2025). Advances in the removal of non-metallic inclusions from aluminum melts towards cleaner, higher-performance materials. Journal of Materials Science, 60(29), 12291–12314. https://doi.org/10.1007/s10853-025-11195-9
Yuan, H., Luo, T., Zhang, D., & Wang, Q. (2023). Harmless treatment and recycling of secondary aluminum dross: A review. Journal of Sustainable Cement-Based Materials, 12(11), 1460–1473. https://doi.org/10.1080/21650373.2023.2232362
Zhang, G., Lu, W., Wu, X., Yang, B., Tan, Y., Xu, Z., Tang, H., Zeng, J., & Wang, J. (2023). A new strategy on designing fluxes for aluminum alloy melt refinement. Materials, 16(6), Article 2322. https://doi.org/10.3390/ma16062322
Zhang, P., Zhu, X., & Jin, Q. (2023). Exergoeconomic and exergoenvironmental analyses of a promising alumina extraction process from secondary aluminum dross in China. Journal of Environmental Chemical Engineering, 11(3), Article 109658. https://doi.org/10.1016/j.jece.2023.109658
Zhang, Y., Cai, Y., Liu, S., Su, Z., & Jiang, T. (2023). Life cycle assessment of aluminum-silicon alloy production from secondary aluminum in China. Journal of Cleaner Production, 392, Article 136214. https://doi.org/10.1016/j.jclepro.2023.136214
Zhang, Z., Yang, L.-Q., Zhao, S.-M., Xia, X.-C., Wang, Z.-Z., Li, Y.-F., Yin, S.-Z., & Du, X.-W. (2022). Effects of stirring speed and flux composition on the recycling of aluminum foams. Materials Research Express, 9(10), Article 106516. https://doi.org/10.1088/2053-1591/ac9958
Zhu, X., & Jin, Q. (2021). Comparison of three emerging dross recovery processes in China’s aluminum industry from a life-cycle assessment perspective. ACS Sustainable Chemistry & Engineering, 9(19), 6776–6787. https://doi.org/10.1021/acssuschemeng.1c00960
Zhu, X., Jin, Q., & Ye, Z. (2020). Life cycle environmental and economic assessment of alumina recovery from secondary aluminum dross in China. Journal of Cleaner Production, 277, Article 123291. https://doi.org/10.1016/j.jclepro.2020.123291
Zhu, Y., Khan, O., Heidari, M., Tsai, A., Chappuis, L., Chiriac, C., Freiberg, D., Hamid, A., Kim, H. C., De Kleine, R., Sundararajan, A., & Cooper, D. R. (2025). Analysis of scrap flows from recycling aluminum-intensive vehicles in the United States: Insights from a case study on the F-150. Resources, Conservation and Recycling, 217, Article 108199. https://doi.org/10.1016/j.resconrec.2025.108199
Zou, Z., Yang, S., Chen, Y., Chen, Z., Huang, J., Xie, Y., Evrendilek, F., Xie, W., Zhong, S., Yang, Z., & Liu, J. (2026). Detoxification and valorization of hazardous secondary aluminum dross: A critical review of contaminant transformation, processing technologies, and emerging frontiers. Processes, 14(8), Article 1212. https://doi.org/10.3390/pr14081212
Zuo, Z., Lv, H., Li, R., Liu, F., & Zhao, H. (2021). A new approach to recover the valuable elements in black aluminum dross. Resources, Conservation and Recycling, 174, Article 105768. https://doi.org/10.1016/j.resconrec.2021.105768
Published
Issue
Section
License
Copyright (c) 2026 Antonio Clareti Pereira (Author)

This work is licensed under a Creative Commons Attribution 4.0 International License.
