Ca–Al Metallothermic Reduction: A Critical Review of Reductant Design, Reaction Pathways, Slag Engineering, and Scale-Up

Authors

DOI:

https://doi.org/10.66104/bn5j2634

Keywords:

liga cálcio–alumínio, redução metalotérmica, calciotermia, aluminotermia, escória de aluminato de cálcio, separação metal–escória

Abstract

Calcium–aluminum (Ca–Al) alloys occupy a distinctive metallothermic design space between aluminothermy and calciothermy because Ca changes reductant activity, condensed–vapor partitioning, phase evolution, slag mineralogy, and metal–slag separation. This structured critical narrative review distinguishes direct pre-alloyed Ca–Al evidence from separately dosed Ca + Al, Ca-assisted aluminothermy, calciothermic/aluminothermic analogs, and CaO–Al₂O₃ slag studies. The review is evidence-classified but is not PRISMA-compliant; database-level retrieval counts, duplicate-removal counts, and exclusion logs were not retained, so corpus completeness cannot be independently reconstructed. It develops an author-developed Activities–Thermochemical response–Phase pathway–Slag and separation–Quality (A–T–P–S–Q) interpretive framework and two stoichiometric normalization descriptors: the reductant-equivalent ratio and the calcium share of oxygen-removal capacity. These descriptors normalize nominal oxygen-removal capacity but are not thermodynamic activity models or validated predictors of recovery. Recalculation of published compositions illustrates their value: a master alloy containing 69.4 wt.% Ca gives a calcium oxygen-removal share of about 0.504, whereas a Ca/Al mass ratio of 0.45 gives about 0.168. Across refractory and rare-metal systems, Ca–Al performance is governed by a coupled operating window rather than maximum Ca addition. Ca can strengthen reduction and reshape phase and slag pathways, but excessive Ca increases volatilization, containment, refractory, and safety burdens; maximum chemical conversion therefore need not coincide with maximum recovery or purity. Ca–Al should be selected only when its coupled benefits in redox strength, heat balance, product purity, or slag separation outweigh its volatility, containment, refractory, and safety burdens. Progress requires activity-informed thermodynamics, time-resolved phase analysis, closed Ca/Al/O balances, measured slag/interfacial properties, and prospective pilot validation.
Views: 286Downloads: 185

Downloads

Download data is not yet available.

Author Biography

  • Antonio Clareti Pereira, University of São Paulo (USP), Belo Horizonte, Minas Gerais, Brazil
    Informação não fornecida pelo autor

References

Amon, A., Moore, E. E., Henderson, H. B., Shittu, J., Kunz, M., Kastamo, S., Huotari, N., Loukus, A., Ott, R., Weiss, D., & McCall, S. K. (2024). Aluminothermic reduction of CeO₂: Mechanism of an economical route to aluminum–cerium alloys. Materials Horizons, 11(10), 2382–2387. https://doi.org/10.1039/D4MH00087K

Athelli, A. R., & Reddy, R. G. (2026). Calciothermic reduction of samarium oxide to samarium. In The Minerals, Metals & Materials Society (Ed.), TMS 2026 155th Annual Meeting & Exhibition supplemental proceedings (pp. 1105–1113). Springer Nature Switzerland. https://doi.org/10.1007/978-3-032-13828-6_91

Azof, F. I., Tang, K., You, J., & Safarian, J. (2020). Synthesis and characterization of 12CaO·7Al₂O₃ slags: The effects of impurities and atmospheres on the phase relations. Metallurgical and Materials Transactions B, 51, 2689–2710. https://doi.org/10.1007/s11663-020-01969-8

Balakirev, V. F., Osinkina, T. V., Krasikov, S. A., Zhilina, E. M., Vedmid’, L. B., & Zhidovinova, S. V. (2021). Joint metallothermic reduction of titanium and rare refractory metals of Group V. Russian Journal of Non-Ferrous Metals, 62(2), 190–196. https://doi.org/10.3103/S1067821221020024

Blenau, L. W., Vogt, D., Lonski, O., Abrar, A., Fabrichnaya, O., & Charitos, A. (2023). Development of a process to recycle NdFeB permanent magnets based on the CaO–Al₂O₃–Nd₂O₃ slag system. Processes, 11(6), Article 1783. https://doi.org/10.3390/pr11061783

Bullón, J., Crego, Ó., Ferrín, J. L., Gómez, D., Martínez, I., & Pérez-Pérez, L. J. (2025). Separation time of aluminothermic reduction products for sustainable silicon production. Open Research Europe, 4, Article 249. https://doi.org/10.12688/openreseurope.18833.2

Cai, T., Zhang, Y., Zheng, S., & Zhang, Y. (2026). Reaction pathway of the CaO- and CaCl₂-assisted aluminothermic reduction of TiO₂ for the precise fabrication of Ti₂O. Metallurgical and Materials Transactions B, 57(3), 1538–1549. https://doi.org/10.1007/s11663-025-03937-6

Cheng, C., Song, K.-X., Song, Z.-W., Wang, L.-F., Xu, Q.-Q., Zhang, L.-L., Han, C., Dou, Z.-H., & Zhang, T.-A. (2022). Synthesis of as-cast WCu composite containing micro- and nano-size tungsten particles using aluminothermic reduction. JOM, 74(3), 931–937. https://doi.org/10.1007/s11837-021-05047-5

Cheng, C., Song, Z.-W., Song, K.-X., Wang, L.-F., Huang, T., Zhou, Y.-J., Liu, H.-T., Li, S.-L., Han, C., Dou, Z.-H., & Zhang, T.-A. (2022). In-situ synthesis and characterizations of a novel aluminum bronze composite reinforced with micro-size tungsten particles. JOM, 74(11), 4146–4153. https://doi.org/10.1007/s11837-022-05311-2

Cheng, C., Song, Z.-W., Wang, L.-F., Song, K.-X., Huang, T., Zhao, L., Wang, L.-S., Dou, Z.-H., & Zhang, T.-A. (2022). Novel synthesis of CuW composite reinforced with lamellar precipitates via aluminothermic reduction. Rare Metals, 41(12), 4047–4054. https://doi.org/10.1007/s12598-022-02092-0

Cheng, C., Wang, X., Song, K., Song, Z., Dou, Z., Zhang, M., Liu, H., Li, X., & Niu, L. (2023). Effects of CaO addition on the CuW composite containing micro- and nano-sized tungsten particles synthesized via aluminothermic coupling with silicothermic reduction. Nanotechnology Reviews, 12(1), Article 20220527. https://doi.org/10.1515/ntrev-2022-0527

Cheng, C., Wang, X.-Y., Zhang, T.-A., Dou, Z.-H., Song, K.-X., Wang, M.-X., Feng, Y.-S., Huang, T., Liu, H.-T., Li, X.-H., & Li, K. (2024). Metal-slag separation strengthening through in situ slagging during CuW composite preparation by metallothermic reduction. Rare Metals, 43(11), 6113–6121. https://doi.org/10.1007/s12598-024-02820-8

Coetsee, T., & De Bruin, F. (2026). Sodium-oxide fluxed slag design, phase chemistry and thermochemistry calculations for aluminium recycling from aluminothermic reduction of manganese ore. Crystals, 16(6), Article 401. https://doi.org/10.3390/cryst16060401

Coetsee, T., De Bruin, F., Komarov, O., Popov, A., & Khudyakova, V. (2026). Thermochemical simulation of scheelite–millscale aluminothermy reactions in tungsten-alloyed steel production. Reactions, 7(2), Article 36. https://doi.org/10.3390/reactions7020036

de Oliveira, J. M., Anes, I. A., Coleti, J. L., Espinosa, D. C. R., de Carvalho, M. S., & Tenório, J. A. S. (2023). Niobium and tantalum recovery from the primary source and from tin slag, an industrial challenge: A review. The Canadian Journal of Chemical Engineering, 101(4), 1743–1761. https://doi.org/10.1002/cjce.24621

Deng, X.-L., Cheng, Y.-W., He, F.-L., Lv, Z.-P., Li, S.-L., He, J.-L., & Song, J.-X. (2026). Role of precursor and in situ mechanistic elucidation in metallothermic reduction reaction. Tungsten, 8(2), 289–313. https://doi.org/10.1007/s42864-026-00372-1

Disconzi, F., Bellotto, M., Frazzetto, R., Brunelli, K., Ardit, M., & Artioli, G. (2025). Aluminothermic recovery of strategic ferroalloys from ladle slag: An integrated thermodynamic and experimental approach. Minerals, 15(11), Article 1121. https://doi.org/10.3390/min15111121

Ellingham, H. J. T. (1944). Reducibility of oxides and sulphides in metallurgical processes. Journal of the Society of Chemical Industry, 63, 125–133.

Emil-Kaya, E., Sørli, F., Wallin, M., & Tranell, G. (2024, June 17–19). Refining of Si-Ca-Al alloys using slag treatments [Conference presentation]. 12th International Conference on Molten Slags, Fluxes and Salts (MOLTEN 2024), Brisbane, Australia.

Fu, D.-X., Wang, Y.-W., Di, Y.-Z., Peng, J.-P., & Feng, N.-X. (2024). Factors affecting reduction efficiency in industrial retorts for Mg production by aluminothermic process. Transactions of Nonferrous Metals Society of China, 34(4), 1288–1299. https://doi.org/10.1016/S1003-6326(24)66471-X

Geng, R., Li, J., & Shi, C. (2020). Evolution of calcium aluminate inclusions by cerium treatment in Al-killed steel during Ruhrstahl–Heraeus refining process. Steel Research International, 91(9), Article 2000117. https://doi.org/10.1002/srin.202000117

Gorkunov, V., & Munter, R. (2007). Calcium–aluminothermal production of niobium and mineral composition of the slag. Proceedings of the Estonian Academy of Sciences: Chemistry, 56(3), 142–156. https://doi.org/10.3176/chem.2007.3.04

Gulyaeva, R. I., Sergeeva, S. V., Petrova, S. A., & Udoeva, L. Yu. (2022). Calciothermic reduction of iron and manganese tantalates. Inorganic Materials: Applied Research, 13(2), 536–542. https://doi.org/10.1134/S2075113322020162

Gulyaeva, R. I., Udoeva, L. Yu., Petrova, S. A., Sergeeva, S. V., Pikulin, K. V., & Agafonov, S. N. (2022). Phase transformation during metallothermic reduction of tantalite. Metallurgist, 66(1–2), 200–214. https://doi.org/10.1007/s11015-022-01316-z

Guo, X.-Y., Dong, Z.-W., Xia, Y., Liu, P.-D., Liu, H.-N., & Tian, Q.-H. (2022). Preparation of low-oxygen-containing Ti–48Al–2Cr–2Nb alloy powder by direct reduction of oxides. Transactions of Nonferrous Metals Society of China, 32(4), 1351–1361. https://doi.org/10.1016/S1003-6326(22)65858-8

Guryanov, A. M., Yudin, S. N., Kasimtsev, A. V., Volodko, S. S., Alimov, I. A., & Evstratov, E. V. (2023). Kinetics and mechanism of calcium hydride synthesis of the intermetallic compound Cr₂Ta. Inorganic Materials, 59(5), 463–474. https://doi.org/10.1134/S0020168523050059

Huang, J., Zhang, L., Yu, W., Chen, J., Li, X., Li, Q., Liao, T., & Mo, X. (2025). Recovery of rare earth elements from calciothermic reduction slag by sulfation roasting–water leaching method. Minerals, 15(10), Article 1025. https://doi.org/10.3390/min15101025

Huo, G., Qiu, J., & Liu, C. (2026). Experimental study on phase equilibria of CaO–Al₂O₃–La₂O₃ system at 1873 and 1773 K. Journal of the American Ceramic Society, 109(2), Article e70534. https://doi.org/10.1111/jace.70534

Islam, M. K., Pownceby, M. I., Somerville, M., Tardio, J., Haque, N., & Bhargava, S. K. (2022). Effect of B₂O₃ on the liquidus temperature and phase equilibria in the CaO–Al₂O₃–SiO₂–B₂O₃ slag system, relevant to the smelting of e-waste. Journal of Sustainable Metallurgy, 8(4), 1590–1605. https://doi.org/10.1007/s40831-022-00581-1

Islam, M. K., Somerville, M., Pownceby, M. I., Tardio, J., Bhargava, S., & Haque, N. (2024). Experimental phase equilibria and liquidus of CaO–Al₂O₃–SiO₂–Na₂O–B₂O₃ slags relevant to e-waste processing. Metallurgical and Materials Transactions B, 55(1), 216–228. https://doi.org/10.1007/s11663-023-02952-9

Jain, U., & Awasthi, A. (2025). The use of Al₂O₃ as heat-sink during vanadium extraction by thermite process. Mineral Processing and Extractive Metallurgy, 134(1), 33–42. https://doi.org/10.1177/25726641241312789

Jiang, D., Zhao, Z., Tang, H., Zhang, H., Wang, R., Che, Y., & He, J. (2026). Research status and progress on preparation and purification of niobium metal by pyrometallurgy. Rare Metal Materials and Engineering, 55(8), 1917–1928. https://doi.org/10.12442/j.issn.1002-185X.20250397

Karati, A., Parmar, H., Riedemann, T., Besser, M., Prodius, D., & Nlebedim, I. C. (2025). Rare earth metals production using alternative feedstock that eliminates HF. Nature Communications, 16, Article 4528. https://doi.org/10.1038/s41467-025-59468-w

Kasimtsev, A. V., Levinsky, Yu. V., & Yudin, S. N. (2020). Calciothermic powders of rare metals and intermetallic compounds. Non-Ferrous Metals, (2), 31–50. https://doi.org/10.17580/nfm.2020.02.05

Khomenko, N. Yu., Konovalikhin, S. V., Chuev, I. I., Guda, S. A., Silyakov, S. L., & Kovalev, D. Yu. (2020). X-ray diffraction study of a new phase in the Ni–W–C system. Inorganic Materials, 56(6), 572–576. https://doi.org/10.1134/S0020168520060072

Kim, T. S., & Park, J. H. (2020). Thermodynamics of iron redox equilibria and viscosity-structure relationship of CaO–Al₂O₃–FeₜO melts. Journal of Non-Crystalline Solids, 542, Article 120089. https://doi.org/10.1016/j.jnoncrysol.2020.120089

Kim, T., & Lim, J.-W. (2022). Surface characterization of Ti and Ti–6Al–4V alloy by Ca vapor deoxidation: Relation between surface morphology and deoxidation reaction. Applied Surface Science, 590, Article 153098. https://doi.org/10.1016/j.apsusc.2022.153098

Kotschote, N. L., Bauer, N. M., Klar, P. J., & Ebbinghaus, S. G. (2026). Effects of niobium substitution on crystal structure and physical properties of mayenite Ca₁₂Al₁₄O₃₃. Journal of Physics and Chemistry of Solids, 213, Article 113602. https://doi.org/10.1016/j.jpcs.2026.113602

Kroll, W. (1937). Verformbares Titan und Zirkon. Zeitschrift für Anorganische und Allgemeine Chemie, 234(1), 42–50. https://doi.org/10.1002/zaac.19372340105

Kryzhanov, M. V., & Orlov, V. M. (2023). Calcium vapor reduction of niobium oxide compounds. Inorganic Materials, 59(11), 1250–1260. https://doi.org/10.1134/S0020168523110079

Kudyba, A., Akhtar, S., Johansen, I., & Safarian, J. (2021). Aluminothermic reduction of manganese oxide from selected MnO-containing slags. Materials, 14(2), Article 356. https://doi.org/10.3390/ma14020356

Kulu, P., Goljandin, D., Traksmaa, R., Kaljuvee, T., & Gregor, A. (2021). Thermal properties of calcium-aluminate based materials. IOP Conference Series: Materials Science and Engineering, 1140(1), Article 012028. https://doi.org/10.1088/1757-899X/1140/1/012028

Lee, B. P., Choi, J. S., Ko, J. W., Park, J. G., Min, D. J., & Sohn, I. (2024). Metallothermic reduction of Sc₂O₃ using Al–Ca alloys equilibrated with CaO–CaCl₂ flux. Journal of Materials Research and Technology, 28, 327–334. https://doi.org/10.1016/j.jmrt.2023.11.283

Li, J., Hao, Z., Shu, Y., & He, J. (2020). Fabrication of spherical Ti–6Al–4V powder for additive manufacturing by radio frequency plasma spheroidization and deoxidation using calcium. Journal of Materials Research and Technology, 9(6), 14792–14798. https://doi.org/10.1016/j.jmrt.2020.10.054

Liu, C., Xie, X., Qiu, J., Li, W., & Huo, G. (2024a). Phase diagram of CaO–Al₂O₃–VOₓ slag system under reducing atmosphere. JOM, 76(11), 6555–6567. https://doi.org/10.1007/s11837-024-06866-y

Liu, C., Xie, X., Qiu, J., Li, W., & Huo, G. (2024b). The phase diagram of a CaO–Al₂O₃–VOₓ slag system under argon atmosphere at 1500 °C. Metals, 14(1), Article 108. https://doi.org/10.3390/met14010108

Ma, W., Wang, C., Xu, J., & Yin, R. (2025). Influence of the MgO content and the CaO/Al₂O₃ ratio on the structure and transport properties of molten CaO–Al₂O₃–MgO slag systems: A molecular dynamics study. Metallurgical and Materials Transactions B, 56(5), 5821–5834. https://doi.org/10.1007/s11663-025-03736-z

Makhambetov, Y., Akhmetov, A., Smagulov, A., Sadyk, Z., Kabylkanov, S., Saulebek, Z., & Toleukadyr, R. (2026). Smelting of a complex W-, Mo-, and Cr-containing alloy in an induction furnace via metallothermic reduction. Alloys, 5(2), Article 11. https://doi.org/10.3390/alloys5020011

Makrovets, L. A., Samoilova, O. V., Bakin, I. V., & Mikhailov, G. G. (2022). Thermodynamic analysis of the deoxidation ability of alkaline-earth metals in the presence of aluminum. Russian Metallurgy (Metally), 2022(6), 575–582. https://doi.org/10.1134/S0036029522060180

Ming, G., Li, S., Zhang, Y., Lei, Y., Ren, Y., Lv, G., Wei, K., & Ma, W. (2025). A new method for producing Al–Si–Ca alloys, AlF₃, and MgF₂ using diamond wire saw Si powder and CaF₂–MgO waste slag. Silicon, 17(7), 1555–1569. https://doi.org/10.1007/s12633-025-03287-7

Moura, V. V., Santos, T., & Pereira, C. (2022). Study of aluminothermic slag leaching for uranium and thorium recovery. Brazilian Journal of Radiation Sciences, 10(3B), 1–13. https://doi.org/10.15392/2319-0612.2022.2002

Nababan, D. C., Nuraeni, B. A., Rhamdani, A. R., Pownceby, M. I., & Rhamdhani, M. A. (2026). Metallothermic reduction using aluminum for metal and alloy production. International Materials Reviews. Advance online publication. https://doi.org/10.1177/09506608261467561

National Fire Protection Association. (2022). NFPA 484: Standard for combustible metals. National Fire Protection Association.

Okabe, T. H. (2020). Metallothermic reduction of TiO₂. In Z. Z. Fang, F. H. Froes, & Y. Zhang (Eds.), Extractive metallurgy of titanium: Conventional and recent advances in extraction and production of titanium metal (pp. 131–164). Elsevier. https://doi.org/10.1016/B978-0-12-817200-1.00008-9

Orlov, V. M., & Kryzhanov, M. V. (2020). Calcium reduction of zirconium oxide compounds. Inorganic Materials, 56(7), 734–738. https://doi.org/10.1134/S0020168520070122

Orlov, V. M., & Kryzhanov, M. V. (2021). Calciothermic reduction of titanium oxide compounds. Inorganic Materials, 57(1), 30–37. https://doi.org/10.1134/S0020168520120134

Orlov, V. M., & Kryzhanov, M. V. (2024). Comparison of the pore structure of calciothermic and magnesiothermic niobium and tantalum powders. Inorganic Materials, 60(13), 1426–1437. https://doi.org/10.1134/S0020168525700165

Ortega, J. N., Rupp, B., & Han, F. D. (2026). A review and analysis of extraction methods for aluminum and oxygen from lunar regolith. Space and Planetary Resources, 2, Article 5. https://doi.org/10.1007/s44461-026-00010-1

Palumbo, A. W., & Chubukov, B. A. (2023). Reductant considerations in thermal pathways to primary magnesium metal production: A case for aluminothermic reduction. In S. Barela, A. Leonard, P. Maier, N. R. Neelameggham, & V. M. Miller (Eds.), Magnesium technology 2023 (pp. 7–9). Springer. https://doi.org/10.1007/978-3-031-22645-8_2

Pastor-Vallés, E., Abadías Llamas, A., & Pettersen, J. B. (2025). Carbon-neutral silicon via aluminothermic reduction? Exploring industrial symbiosis through life cycle assessment. ACS Sustainable Chemistry & Engineering, 13(36), 14893–14902. https://doi.org/10.1021/acssuschemeng.5c04666

Pereira, A. C. (2026). Liquid-metal droplet coalescence in metallurgical slags: A critical review of interfacial phenomena, slag properties, hydrodynamics, kinetics, and metal recovery. International Journal of Research and Scientific Innovation, 10(7), 15007–15036. https://doi.org/10.47772/IJRISS.2026.100701023

Philipson, H. G. R., Wallin, M., & Einarsrud, K. E. (2024a). Aluminothermic reduction kinetics of calcium silicate slag for silicon alloy production. Metals, 14(6), Article 604. https://doi.org/10.3390/met14060604

Philipson, H. G. R., Wallin, M., & Einarsrud, K. E. (2024b). Investigation of liquid–liquid reaction phenomena of aluminum in calcium silicate slag. Materials, 17(7), Article 1466. https://doi.org/10.3390/ma17071466

Pikulin, K. V., Galkova, L. I., Gulyaeva, R. I., Udoeva, L. Yu., Sergeeva, S. V., & Tyushnyakov, S. N. (2026). Phase formation features during metallothermic reduction of natural wolframite. Non-Ferrous Metals, (1), 9–19. https://doi.org/10.17580/nfm.2026.01.02

Pikulin, K. V., Tyushnyakov, S. N., Gulyaeva, R. I., Petrova, S. A., Dmitriev, A. N., & Vitkina, G. Yu. (2026). Phase formation features in the metallothermal reduction of natural coltan. Metals, 16(4), Article 436. https://doi.org/10.3390/met16040436

Qiu, J., Jiang, J., Xie, X., Li, W., & Liu, C. (2023). Phase diagram of CaO–Al₂O₃–V₂O₅ slag system at 1500 °C and 1600 °C. Journal of Sustainable Metallurgy, 9(3), 1010–1019. https://doi.org/10.1007/s40831-023-00704-2

Rafique, M. M. A. (2024). Pyrometallurgy and electrometallurgy of rare earths–Part A: Analysis of metallothermic reduction and its variants. Mineral Processing and Extractive Metallurgy Review, 45(4), 389–396. https://doi.org/10.1080/08827508.2022.2164576

Rasheed, M. Z., Dahm, K., Hunter-Smith, G., Pistidda, C., & Bumby, C. (2026). Optimizing the yield of TiFe intermetallic compound from direct calciothermic reduction of ilmenite sand. Journal of Alloys and Compounds, 1058, Article 187019. https://doi.org/10.1016/j.jallcom.2026.187019

Ren, L., Le, Q., Gao, S., Wei, X., Yin, Z., Liao, Q., & Li, Y. (2025). Thermodynamics and kinetics of preparation of Y-containing magnesium alloy by calciothermic reduction in Mg–Ca melt. Metallurgical and Materials Transactions B, 56(3), 2332–2349. https://doi.org/10.1007/s11663-025-03488-w

Sahoo, D. K., Sarode, P. S., Ambare, D. N., Mondal, S., & Singh, D. K. (2024). Study on the extraction of neodymium metal by calciothermic reduction process. Mineral Processing and Extractive Metallurgy, 133(3), 101–108. https://doi.org/10.1177/25726641241276483

Sergeeva, S. V., Gulyaeva, R. I., Udoeva, L. Yu., Petrova, S. A., & Tyushnyakov, S. N. (2022). Thermodynamic simulation and experimental investigation of the calciothermic reduction of metals from manganese and iron niobates. Russian Metallurgy (Metally), 2022(8), 909–918. https://doi.org/10.1134/S0036029522080146

Sohn, H.-S. (2026). Smelting and recycling of tantalum. Resources Recycling, 35(1), 3–16. https://doi.org/10.7844/kirr.2026.35.1.3

Song, Y., Dou, Z., Zhang, T.-A., & Wang, G. (2021). Mechanisms of metal-slag separation behavior in thermite reduction for preparation of TiAl alloy. Journal of Materials Engineering and Performance, 30(12), 9315–9325. https://doi.org/10.1007/s11665-021-06074-8

Su, K., Ma, X., & Zhao, B. (2021). Harmless treatment and valuable metals recovery of tungsten leaching residues: A thermodynamic and experimental study. JOM, 73(6), 1937–1946. https://doi.org/10.1007/s11837-021-04682-2

Su, Y., Duan, S., Kim, J., Kim, J.-K., & Park, J. H. (2026). Sustainable manufacturing of clean Ti-Ni alloy by remelting titanium scrap with calcium and halide fluxes. Metals and Materials International, 32(2), 734–748. https://doi.org/10.1007/s12540-025-01956-1

Suzuki, R. O., & Ono, K. (2025). Overview: OS process–I. Fundamental. Materials Transactions, 66(8), 913–925. https://doi.org/10.2320/matertrans.MT-M2024125

Teslia, M., Teslia, S., & Solodkyi, I. (2026). Synthesis of Mo–Ti–Ta–Cr alloy powders by calciothermic reduction. Journal of Manufacturing and Materials Processing, 10(7), Article 251. https://doi.org/10.3390/jmmp10070251

Turkdogan, E. T. (1983). Physicochemical properties of molten slags and glasses. The Metals Society.

Tyushnyakov, S. N., Gulyaeva, R. I., Udoeva, L. Yu., Sergeeva, S. V., & Petrova, S. A. (2021). Metallothermic reduction of natural cassiterite. Metallurgist, 65(7–8), 746–759. https://doi.org/10.1007/s11015-021-01212-y

Usta, M. C., Yörük, C. R., Uibu, M., Traksmaa, R., Hain, T., Gregor, A., & Trikkel, A. (2023). Carbonation and leaching behaviors of cement-free monoliths based on high-sulfur fly ashes with the incorporation of amorphous calcium aluminate. ACS Omega, 8(32), 29543–29557. https://doi.org/10.1021/acsomega.3c03286

Verein Deutscher Eisenhüttenleute. (1995). Slag atlas (2nd ed.). Verlag Stahleisen.

Volodin, A. M., Kenzhin, R. M., Kapishnikov, A. V., Komarovskikh, A. Yu., & Vedyagin, A. A. (2022). Aluminothermic synthesis of dispersed electrides based on mayenite: XRD and EPR study. Materials, 15(24), Article 8988. https://doi.org/10.3390/ma15248988

Wang, C., Xie, C., Xu, J., & Wan, K. (2025). Wettability and spreading kinetics between some refractory materials and molten calcium aluminate slag. Steel Research International, 96(9), 156–175. https://doi.org/10.1002/srin.202400895

Wang, F., Xu, B., Wan, H., Yang, J., Yang, B., & Jiang, W. (2020). Preparation of vanadium powders by calcium vapor reduction of V₂O₃ under vacuum. Vacuum, 173, Article 109133. https://doi.org/10.1016/j.vacuum.2019.109133

Wang, G., Nabeel, M., Dogan, N., Mu, W., & Phillion, A. B. (2025). Dissolution kinetics and mechanisms of calcium aluminate inclusions in CaO–Al₂O₃–SiO₂–(MgO) steelmaking slags. Ceramics International, 51(24), 42315–42326. https://doi.org/10.1016/j.ceramint.2025.06.445

Wang, L. L., Munir, Z. A., & Maximov, Y. M. (1993). Thermite reactions: Their utilization in the synthesis and processing of materials. Journal of Materials Science, 28(14), 3693–3708. https://doi.org/10.1007/BF00353167

Wang, Y., Tang, H., Wang, K., Xiang, Q., Jia, X., & Zhang, J. (2026). A total calcium to total oxygen mass ratio control model based on Ca–Al–O ternary phase diagram and its application to calcium treatment process of Al-deoxidized steels. Metallurgical and Materials Transactions B. Advance online publication. https://doi.org/10.1007/s11663-026-04227-5

Xie, X., Liu, C., Qiu, J., Li, W., & Huo, G. (2025). Phase equilibrium of CaO–Al₂O₃–VOₓ system in air atmosphere at 1400 °C. Metallurgical and Materials Transactions B, 56(3), 2982–2992. https://doi.org/10.1007/s11663-025-03537-4

Xie, X., Liu, C., Qiu, J., Li, W., & Huo, G. (2026). Phase equilibrium study of CaO–Al₂O₃–VOₓ slag system under argon atmosphere at 1600 °C. Metallurgical and Materials Transactions B, 57(1), 680–692. https://doi.org/10.1007/s11663-025-03878-0

Yao, H., Zhuang, C., Li, C., Xiang, S., Li, X., Yang, G., & Zhang, Z. (2023). Study on the effect of calcium alloy on arsenic removal from scrap-based steel production. Materials, 16(8), Article 3113. https://doi.org/10.3390/ma16083113

Yuan, F., Zhao, Z., Zhang, Y., & Wu, T. (2022). Effect of Al₂O₃ content on the viscosity and structure of CaO–SiO₂–Cr₂O₃–Al₂O₃ slags. International Journal of Minerals, Metallurgy, and Materials, 29(8), 1522–1531. https://doi.org/10.1007/s12613-021-2306-2

Yudin, S. N., Volodko, S. S., Guryanov, A. M., Kasimtsev, A. V., Sviridova, T. A., Alimov, I. A., Kuzovchikov, S. N., Kondratiev, A. A., Korotitskiy, A. V., & Moskovskikh, D. O. (2024). Fabrication of refractory intermetallic Cr₂Ta by reducing metal oxides with calcium hydride. Metallurgical and Materials Transactions B, 55(3), 1261–1276. https://doi.org/10.1007/s11663-024-03018-0

Yudin, S. N., Volodko, S. S., Rumyantsev, B. A., Kotyakova, K. Yu., Moskovskikh, D. O., Markova, G. V., Evstratov, E. V., Guryanov, A. M., & Kasimtsev, A. V. (2026). Occurrence forms of light impurity elements in Cr–Ta powders produced by calciothermic reduction. International Journal of Refractory Metals and Hard Materials, 134, Article 107472. https://doi.org/10.1016/j.ijrmhm.2025.107472

Yudin, S., Volodko, S., Berdonosova, E., Klyamkin, S., Yermekova, Z., & Moskovskikh, D. (2025). Effect of synthesis parameters on the phase composition, purity, and structure of LaNi₅ powder produced by the calciothermic process. Journal of Alloys and Compounds, 1010, Article 178170. https://doi.org/10.1016/j.jallcom.2024.178170

Zeng, Y., Zhang, Y., Xue, N., Liu, H., & Zhang, Z. (2026). A novel electro-aluminothermic route to V–Ni alloys: Ca₃(VO₄)₂ as the vanadium source. RSC Advances, 16(35), 35950–35960. https://doi.org/10.1039/D6RA03772K

Zhang, L., Chen, M., & Sun, X. (2022). Evolution of viscosity and structural properties during aluminothermic reduction of vanadium-enriched slag. Steel Research International, 93(6), Article 2100738. https://doi.org/10.1002/srin.202100738

Zhang, X., Liu, C., & Jiang, M. (2022). Effect of B₂O₃ addition and CaO/Al₂O₃ ratios on melt structure and viscosity of CaO–Al₂O₃-based slags. Metals, 12(8), Article 1255. https://doi.org/10.3390/met12081255

Zhi, W., Wang, F.-Y., Chen, X., Tian, Y., & Yang, B. (2022). Thermodynamic assessment of the CaO–Al₂O₃–Sc₂O₃ ternary system. Calphad, 78, Article 102454. https://doi.org/10.1016/j.calphad.2022.102454

Zhu, M., & Safarian, J. (2023). Alumina production from CaO–Al₂O₃–SiO₂ slag produced in SisAl process. In TRAVAUX 52: Proceedings of the 41st International ICSOBA Conference (pp. 499–509). ICSOBA.

Zhu, M., Philipson, H., Blandhol, K., Djupvik, V., Engvoll, K., Safarian, J., Tang, K., Görnerup, M., Pastor-Vallés, E., Wallin, M., & Tranell, G. (2024). Pilot-scale aluminothermic production of silicon alloy and alumina-rich slag. ACS Sustainable Chemistry & Engineering, 12(40), 14795–14809. https://doi.org/10.1021/acssuschemeng.4c05326

Published

2026-08-26

How to Cite

Ca–Al Metallothermic Reduction: A Critical Review of Reductant Design, Reaction Pathways, Slag Engineering, and Scale-Up. (2026). Journal International Review of Research Studies, 1(09 - September), 1-49. https://doi.org/10.66104/bn5j2634

Similar Articles

1-10 of 23

You may also start an advanced similarity search for this article.

Most read articles by the same author(s)

1-10 of 45