Numerical Homogenization of Concrete Reinforced with Aluminum Powder Based on the Mori Tanaka Method
DOI:
https://doi.org/10.66104/4eat5r11Keywords:
Aluminum powder-reinforced concrete, Mori-Tanaka method, numerical homogenization, effective elastic properties, composite materials, elastic stiffnessAbstract
This study investigates the effective elastic behavior of concrete reinforced with aluminum powder using a numerical homogenization approach based on the Mori-Tanaka method. The objective is to predict the influence of aluminum powder volume fraction on the effective Young's modulus and Poisson's ratio of the composite material under linear elastic assumptions. A numerical model implemented in Python is developed to calculate the effective bulk and shear moduli of the reinforced concrete and to derive the corresponding homogenized elastic properties. The results indicate a progressive increase in the effective Young's modulus as the aluminum powder content increases from 0% to 30%. The predicted Young's modulus rises from 20 GPa for plain concrete to approximately 30.74 GPa at 30% reinforcement volume fraction, corresponding to an increase of about 53.7%. This stiffness enhancement is mainly attributed to the higher elastic modulus of the aluminum phase and to its contribution to the effective bulk and shear response of the composite. In contrast, a slight decrease in the effective Poisson's ratio is observed with increasing reinforcement content, reflecting the modification of the elastic response of the composite system. Within the investigated numerical range, the highest predicted elastic stiffness is obtained at 30% aluminum powder volume fraction. However, this value should not be interpreted as a definitive experimental or structural optimum, since the model does not account for workability, porosity, particle agglomeration, imperfect bonding, microcracking, creep, fatigue, durability, or possible chemical interactions between aluminum powder and the cementitious matrix. Therefore, the proposed approach should be considered as a preliminary numerical screening tool for estimating effective elastic properties. Future experimental validation is required before practical structural application.Downloads
References
Mori, T., & Tanaka, K. (1973). Average stress in matrix and average elastic energy of materials with misfitting inclusions. Acta Metallurgica, 21(5), 571-574.
Harrat, Z. R., Amziane, S., Krour, B., & Bouiadjra, M. B. (2021). On the static behavior of nano SiO₂ based concrete beams resting on an elastic foundation. Computers and Concrete, 27(6), 575-583.
Chatbi, M., Krour, B., Benatta, M. A., & Bouiadjra, M. B. (2022). Bending analysis of nano-SiO₂ reinforced concrete slabs resting on elastic foundation. Structural Engineering and Mechanics, 84(5), 685-697.
Benfrid, A., Benbakhti, A., Harrat, Z. R., Chatbi, M., Krour, B., & Bouiadjra, M. B. (2023). Thermomechanical analysis of glass powder based eco-concrete panels: Limitations and performance evaluation. Periodica Polytechnica Civil Engineering, 67(4), 1284-1297.
Kecir, A., Chatbi, M., Harrat, Z. R., Bouiadjra, M. B., Bouremana, M., & Krour, B. (2023). Mechanical performance of concrete reinforced with steel powder using Eshelby homogenization. Periodica Polytechnica Civil Engineering, 68(1), 101-115.
Dine El Hannani, S., Harrat, Z. R., Chatbi, M., & Bouiadjra, M. B. (2023). Buckling and free vibration analyses of various nanoparticle reinforced concrete beams resting on multi-parameter elastic foundations. Materials, 16(17), 5865.
Harrat, Z. R., Chatbi, M., Krour, B., & Bouiadjra, M. B. (2023). Modeling the thermoelastic bending of ferric oxide (Fe₂O₃) nanoparticles-enhanced RC slabs. Materials, 16(8), 3043.
Chatbi, M., Harrat, Z. R., Benatta, M. A., & Bouiadjra, M. B. (2023). Nano-clay platelet integration for enhanced bending performance of concrete beams resting on elastic foundation: An analytical investigation. Materials, 16(14), 5040.
Benfrid, A., & Bouiadjra, M. B. (2025). A new approach for studying plaster beam bending based on DISS Algerian (nano-short-bio-fibres). Modern Journal of Health and Applied Sciences, 2(1), 43-58.
Chatbi, M., Lozančić, S., Harrat, Z. R., & Hadzima-Nyarko, M. (2026). Computational models for the vibration and modal analysis of silica nanoparticle-reinforced concrete slabs with elastic and viscoelastic foundation effects. Modelling, 7(1), 8.
Yerkrou, A., Benfrid, A., Krour, B., & Bouiadjra, M. B. (2025). A programming model for analyzing the mechanical and thermal buckling behavior of eco-concrete panels incorporating recycled waste materials (glass and red bricks). Veredas do Direito: Direito Ambiental e Desenvolvimento Sustentável, 22(2), e3117.
Boukhari, A., Driz, H., Rezagui, D., & Benfrid, A. (2025). Flexural performance of concrete beams incorporating granite waste. Veredas do Direito: Direito Ambiental e Desenvolvimento Sustentável, 22(2), e3155.
Benfrid, A., Murawski, K., & Belmahi, S. (2025). Thermal instability of a polymer panel reinforced with glass particulates. ISPEC Journal of Science Institute, 4(2), 210-215.
Received: __/__/____ - Accepted: __/__/____
Vol:
DOI:
Pages: 1-25
6
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Abdelmoutalib Benfrid, Krzysztof Murawski, Milad Khatib, Ahmed Boukhari (Author)

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
