<?xml version="1.0" encoding="UTF-8"?>
<article xmlns:xlink="http://www.w3.org/1999/xlink" xml:lang="en" xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" article-type="research-article">
  <front>
    <journal-meta>
      <journal-id journal-id-type="ojs">jirrs</journal-id>
      <journal-title-group>
        <journal-title xml:lang="en">JIRRS</journal-title>
      </journal-title-group>
      <self-uri xlink:href="https://jirrs.org.uk/jirrs"/>
    </journal-meta>
    <article-meta>
      <article-id pub-id-type="publisher-id">7306</article-id>
      <title-group>
        <article-title xml:lang="en">Preliminary Experimental Evaluation of Molded Wood-Particle/Epoxy Composite for Future Additive-Manufacturing Applications in Timber Construction</article-title>
      </title-group>
      <contrib-group content-type="author">
        <contrib corresp="yes">
          <name-alternatives>
            <string-name specific-use="display">Hamed Omare</string-name>
            <name name-style="western" specific-use="primary">
              <surname>Omare</surname>
              <given-names>Hamed</given-names>
            </name>
          </name-alternatives>
          <contrib-id contrib-id-type="orcid">https://orcid.org/0009-0001-6640-4724</contrib-id>
          <email>mohamadhamed400@gmail.com</email>
          <xref ref-type="aff" rid="aff-1"/>
        </contrib>
        <contrib corresp="yes">
          <name-alternatives>
            <string-name specific-use="display">Abdelmoutalib Benfrid</string-name>
            <name name-style="western" specific-use="primary">
              <surname>Benfrid</surname>
              <given-names>Abdelmoutalib</given-names>
            </name>
          </name-alternatives>
          <contrib-id contrib-id-type="orcid">https://orcid.org/0009-0007-8171-1654</contrib-id>
          <email>benfridabdelmoutalib2050@gmail.com</email>
          <xref ref-type="aff" rid="aff-2"/>
        </contrib>
        <contrib>
          <name-alternatives>
            <string-name specific-use="display">Ahmed Boukhari</string-name>
            <name name-style="western" specific-use="primary">
              <surname>Boukhari</surname>
              <given-names>Ahmed</given-names>
            </name>
          </name-alternatives>
          <contrib-id contrib-id-type="orcid">https://orcid.org/0009-0003-8971-3698</contrib-id>
          <email>boukhariahmed88@gmail.com</email>
          <xref ref-type="aff" rid="aff-3"/>
        </contrib>
        <contrib>
          <name-alternatives>
            <string-name specific-use="display">Krzysztof Murawski</string-name>
            <name name-style="western" specific-use="primary">
              <surname>Murawski</surname>
              <given-names>Krzysztof</given-names>
            </name>
          </name-alternatives>
          <contrib-id contrib-id-type="orcid">https://orcid.org/0000-0003-3281-9603</contrib-id>
          <email>k.murawski@interia.pl</email>
          <xref ref-type="aff" rid="aff-4"/>
        </contrib>
      </contrib-group>
      <aff id="aff-1">
        <institution content-type="orgname">Kabul Polytechnic University, Afghanistan</institution>
      </aff>
      <aff id="aff-2">
        <institution content-type="orgname">Djillali Liabès University in Sidi Bel Abbès, Algeria</institution>
      </aff>
      <aff id="aff-3">
        <institution content-type="orgname">Department of Civil Engineering, Faculty of Architecture and Civil Engineering, University of Science and Technology of Oran Mohamed Boudiaf - USTO-MB (Oran 31000), Algeria</institution>
      </aff>
      <aff id="aff-4">
        <institution content-type="orgname">The Jacob of Paradies University, Poland</institution>
      </aff>
      <pub-history>
        <event event-type="received">
          <event-desc>Received: <date date-type="received" iso-8601-date="2026-08-13"><day>13</day><month>8</month><year>2026</year></date></event-desc>
        </event>
      </pub-history>
      <abstract xml:lang="en">
        <p>Additive manufacturing offers promising opportunities for producing customized construction components with complex geometries and reduced material waste. However, the development of wood-based composites suitable for future additive-manufacturing applications remains limited. This preliminary experimental study evaluates the compressive behavior of molded wood-particle/epoxy composite intended for further investigation in timber construction and three-dimensional printing. The composite consisted of plane tree (Platanus) wood particles, chopped strand mat fibers, and two epoxy resin hardener systems. Six solid-wood reference cubes and four molded composite cubes, each measuring mm, were prepared and subjected to axial compression. Three solid-wood specimens were tested parallel to the grain and three perpendicular to the grain. Two composite specimens were manufactured using Type epoxy system, while two others were produced using Type epoxy system containing fumed silica. The solid wood exhibited an average compressive strength of MPa parallel to the grain and MPa perpendicular to the grain. The Type composite specimens achieved an average compressive strength of MPa and showed substantial axial deformation. In comparison, the Type composite specimens reached an average compressive strength of MPa, representing an increase of approximately relative to the Type formulation. The improved performance of the Type formulation may be associated with the lower elongation and higher compressive resistance of the epoxy system, together with the possible influence of fumed silica. Nevertheless, these effects could not be evaluated independently because the two formulations differed in both binder characteristics and silica content. The results demonstrate the preliminary mechanical feasibility of producing wood-particle composite with meaningful compressive resistance. However, the specimens were molded rather than manufactured through layer-by-layer deposition. Therefore, the present study does not validate printability, extrusion behavior, interlayer bonding, or structural suitability. Further research should include larger sample sizes, complete mixture characterization, standardized mechanical testing, rheological assessment, extrusion trials, interlayer testing, and durability evaluation.</p>
      </abstract>
      <kwd-group xml:lang="en">
        <kwd>Wood-particle composite</kwd>
        <kwd>Epoxy resin</kwd>
        <kwd>Compressive strength</kwd>
        <kwd>Molded specimens</kwd>
        <kwd>Additive manufacturing</kwd>
        <kwd>Timber construction</kwd>
        <kwd>Preliminary experimental study</kwd>
      </kwd-group>
      <custom-meta-group/>
    </article-meta>
  </front>
  <body>
    <sec>
      <title>RESUMO</title>
      <p>Additive manufacturing offers promising opportunities for producing customized construction components with complex geometries and reduced material waste. However, the development of wood-based composites suitable for future additive-manufacturing applications remains limited. This preliminary experimental study evaluates the compressive behavior of molded wood-particle/epoxy composite intended for further investigation in timber construction and three-dimensional printing. The composite consisted of plane tree (Platanus) wood particles, chopped strand mat fibers, and two epoxy resin hardener systems. Six solid-wood reference cubes and four molded composite cubes, each measuring mm, were prepared and subjected to axial compression. Three solid-wood specimens were tested parallel to the grain and three perpendicular to the grain. Two composite specimens were manufactured using Type epoxy system, while two others were produced using Type epoxy system containing fumed silica. The solid wood exhibited an average compressive strength of MPa parallel to the grain and MPa perpendicular to the grain. The Type composite specimens achieved an average compressive strength of MPa and showed substantial axial deformation. In comparison, the Type composite specimens reached an average compressive strength of MPa, representing an increase of approximately relative to the Type formulation. The improved performance of the Type formulation may be associated with the lower elongation and higher compressive resistance of the epoxy system, together with the possible influence of fumed silica. Nevertheless, these effects could not be evaluated independently because the two formulations differed in both binder characteristics and silica content. The results demonstrate the preliminary mechanical feasibility of producing wood-particle composite with meaningful compressive resistance. However, the specimens were molded rather than manufactured through layer-by-layer deposition. Therefore, the present study does not validate printability, extrusion behavior, interlayer bonding, or structural suitability. Further research should include larger sample sizes, complete mixture characterization, standardized mechanical testing, rheological assessment, extrusion trials, interlayer testing, and durability evaluation.</p>
    </sec>
  </body>
  <back>
    <ref-list>
      <ref id="R1">
        <mixed-citation>1.	AElsheikh, A. H., Abd Elaziz, M., Ramesh, B., Egiza, M., and Al-Qaness, M. A. (2021). Modeling of the drilling process of GFRP composites using a hybrid random vector functional link network and parasitism–predation algorithm. Journal of Materials Research and Technology, 14, 298–311.</mixed-citation>
      </ref>
      <ref id="R2">
        <mixed-citation>2.	Benfrid, A., Benbakhti, A., Harrat, Z. R., Chatbi, M., Krour, B., and Bachir Bouiadjra, M. (2023). Thermomechanical analysis of glass powder-based eco-concrete panels: Limitations and performance evaluation. Periodica Polytechnica Civil Engineering, 67(4), 1284–1297. doi: 10.3311/PPci.22781.</mixed-citation>
      </ref>
      <ref id="R3">
        <mixed-citation>3.	Benfrid, A., Chatbi, M., Harrat, Z. R., and Bachir Bouiadjra, M. (2025). Selective integration of waste-derived glass nanopowders in structural wall concrete: Improving thermal efficiency and elasto-mechanical properties for sustainable construction. Periodica Polytechnica Civil Engineering, 69(3), 954–965. doi: 10.3311/PPci.39913.</mixed-citation>
      </ref>
      <ref id="R4">
        <mixed-citation>4.	Chatbi, M., Harrat, Z. R., Ghazoul, T., and Bachir Bouiadjra, M. (2022a). Free vibrational analysis of composite beams reinforced with randomly aligned and oriented carbon nanotubes, resting on an elastic foundation. Journal of Building Materials and Structures, 9(1), 22–32. doi: 10.34118/jbms.v9i1.1895.</mixed-citation>
      </ref>
      <ref id="R5">
        <mixed-citation>5.	Chatbi, M., Krour, B., Benatta, M. A., Harrat, Z. R., Amziane, S., and Bachir Bouiadjra, M. (2022b). Bending analysis of nano-SiO₂-reinforced concrete slabs resting on an elastic foundation. Structural Engineering and Mechanics, 84(5), 685–697. doi: 10.12989/sem.2022.84.5.685.</mixed-citation>
      </ref>
      <ref id="R6">
        <mixed-citation>6.	Deepti, D., and Venkateswarlu, D. (2016). Studies on the behavior of crimped steel-fiber-reinforced concrete with wood-waste ash as an admixture. SSRG International Journal of Civil Engineering, 3(1), 49–56.</mixed-citation>
      </ref>
      <ref id="R7">
        <mixed-citation>7.	Harrat, Z. R., Chatbi, M., Krour, B., Amziane, S., Bachir Bouiadjra, M., Hadzima-Nyarko, M., Radu, D., and Işık, E. (2024). Bending analysis of nano-Fe₂O₃-reinforced concrete slabs exposed to temperature fields and supported by a viscoelastic foundation. Advances in Concrete Construction, 17(2), 111–126. doi: 10.12989/acc.2024.17.2.111.</mixed-citation>
      </ref>
      <ref id="R8">
        <mixed-citation>8.	ISOMAT S.A. (n.d.-a). EPOMAX-L10: Two-component epoxy injection resin—Technical data sheet. ISOMAT S.A. Accessed 23 July 2026.</mixed-citation>
      </ref>
      <ref id="R9">
        <mixed-citation>9.	ISOMAT S.A. (n.d.-b). EPOMAX Liquid Glass: Transparent two-component epoxy resin—Technical data sheet. ISOMAT S.A. Accessed 11 August 2025.</mixed-citation>
      </ref>
      <ref id="R10">
        <mixed-citation>10.	Matias, E., and Rao, B. (2015). 3D printing: On its historical evolution and the implications for business. In Proceedings of PICMET 2015: Management of the Technology Age.</mixed-citation>
      </ref>
      <ref id="R11">
        <mixed-citation>11.	Murawski, K. (2011). Theory of Technical Stability of Slender Plywood Rods. Warsaw: Publishing House of Warsaw University of Technology. ISBN 978-83-7207-968-8.</mixed-citation>
      </ref>
      <ref id="R12">
        <mixed-citation>12.	Najjar, I. M. R., Sadoun, A. M., Abd Elaziz, M., Abdallah, A. W., Fathy, A., and Elsheikh, A. H. (2022). Predicting kerf-quality characteristics in laser cutting of basalt-fiber-reinforced polymer composites using a neural network and chimp optimization. Alexandria Engineering Journal, 61, 11005–11018.</mixed-citation>
      </ref>
      <ref id="R13">
        <mixed-citation>13.	Omare, H. (2024). Concept of 3D Printing of Wooden Structures. ResearchGate preprint, available January 2024.</mixed-citation>
      </ref>
      <ref id="R14">
        <mixed-citation>14.	Pappula Ganesh Kumar, and Sundara Kumar, K. (2015). Studies on the strength characteristics of fiber-reinforced concrete with wood-waste ash. International Research Journal of Engineering and Technology, 2(9), 181–187.</mixed-citation>
      </ref>
      <ref id="R15">
        <mixed-citation>15.	Pirjan, A., and Petrosanu, D.-M. (2013). The impact of 3D-printing technology on society and the economy. Journal of Information Systems and Operations Management, 7, December 2013.</mixed-citation>
      </ref>
      <ref id="R16">
        <mixed-citation>16.	Shinde, D. K., Raut, D. N., and Gokhare, V. G. (2017). A review paper on 3D-printing aspects and various processes used in 3D printing. International Journal of Engineering Research and Technology, 6(6).</mixed-citation>
      </ref>
      <ref id="R17">
        <mixed-citation>17.	Van der Klift, F., Koga, Y., Todoroki, A., Ueda, M., Hirano, Y., and Matsuzaki, R. (2016). 3D printing of continuous carbon-fiber-reinforced thermoplastic tensile-test specimens. Open Journal of Composite Materials, 6, 18–27. doi: 10.4236/ojcm.2016.61003.</mixed-citation>
      </ref>
      <ref id="R18">
        <mixed-citation>18.	Zumbrunnen, P., and Fovargue, J. (2012). Mid-rise CLT buildings: The United Kingdom’s experience and potential for Australia and New Zealand. In Proceedings of the World Conference on Timber Engineering, Auckland, New Zealand, 15–19 July 2012.</mixed-citation>
      </ref>
    </ref-list>
  </back>
</article>